If you’ve got a plunge pool, courtyard pool, or compact family splash zone, you already know the pain: a handful of gum leaves, a dusting of fine grit, and suddenly your “quick dip” turns into a 40-minute wrestle with a manual vacuum. A small pool should be low-effort and high-fun—especially in Australia, where weekends are for barbies, not back-breaking pool chores. That’s exactly where the PoolBot A100 shines. Purpose-built for smaller pools, it gives you the big-pool clean without the big-pool hassle.

Below, we’ll walk through what makes a great pool vacuum for a small pool, why the PoolBot A100 nails those needs, and how to get the most from it in Aussie conditions.

Why Small Pools Need a Different Kind of Cleaner?

Smaller pools collect debris faster than you think. With less water volume, every leaf, blossom, and speck of dust has a bigger impact on clarity and balance. The ideal vacuum for a small pool should offer:

• Compact design that can navigate tight corners, steps, and benches.

• Gentle but thorough suction to lift fine dust and sand without stirring it back into suspension.

• Quick setup—no hoses, no fiddly connections to your filter system.

• Energy efficiency, because there’s no point saving water and space if you burn through power.

• Easy maintenance, so you actually keep using it every week.

The PoolBot A100 checks all of those boxes with smart engineering focused on small-pool realities.

Meet the PoolBot A100

Think of the PoolBot A100 as your set-and-forget pool mate. It’s designed to slip into smaller spaces and quietly get on with the job while you get on with your day.

Compact & Nimble

Small pools often have built-in seats, narrow swim lanes, or curvy corners. The A100’s low-profile body and agile drive system help it navigate those tight spots without getting wedged or stuck. It moves confidently over fibreglass, vinyl, and smooth concrete finishes common in Australia.

Cordless Convenience

Hose tangles are a mood killer. The PoolBot A100 operates cordless, so there’s nothing trailing behind to snag on steps or handrails. Drop it in, let it work, and pull it out when it’s done—simple.

Smart Cleaning Path

Instead of bumping around at random, the A100 uses an intelligent cleaning pattern to reduce missed patches. On smaller footprints, that’s a big deal: faster coverage, less wheel-spinning, and better battery use.

Fine-Debris Focus

Aussie pools cop a lot of fine dust and pollen—especially after dry, windy days. The A100’s filtration basket is made to trap small particles and larger leaves, so you don’t have to sweep and re-vac the next morning.

Designed for Aussie Conditions

From blazing UV to salt-spray breezes, Australia is tough on outdoor gear. The A100’s UV-resistant shell, weather-ready seals, and easy-rinse filters suit our climate and our habits: quick clean, quick rinse, back to the shed.

Key Benefits for Australian Households

1) Saves Time (in a Real Way)

With a small pool, you often “could” do a manual clean—but that doesn’t mean you want to. The A100 cuts the weekly chore down to minutes of setup and pack-away. You actually stick to a regular schedule, which keeps water clearer and chemistry steadier.

2) Lower Ongoing Costs

A cordless robot doesn’t rely on your pool pump running at high speed to power a suction cleaner. That’s good news for power bills. Regular debris removal also helps your filter stay efficient, easing strain on your equipment over time.

3) Better Water Quality, Fewer Top-Ups

By removing leaf litter and dust promptly, you slow algae growth and reduce the need for shock treatments and backwashing. That’s handy during water restrictions and heatwaves, when topping up and rebalancing gets expensive.

4) Kid- and Pet-Friendly Operation

No long hoses snaking around the yard. No trip hazards. When it’s done, the A100 robotic pool cleaner goes back on its caddy or shelf. The simplicity matters for busy family homes.

Is the PoolBot A100 Right for Your Pool??

The A100 is a standout pool vacuum for small pool owners if:

1. Your pool is a plunge, courtyard, or compact family pool.

2. You want cordless cleaning without fiddly hoses.

3. You’re dealing with a mix of leaf litter and fine dust.

4. You prefer quick maintenance—empty, rinse, click back in.

If you’ve got a large freeform pool or lots of vertical surfaces you absolutely need scrubbed every cycle, a bigger robot might be worth considering. But for small Aussie pools, the A100’s balance of speed, simplicity, and debris pickup is hard to beat.

Simple Setup & Weekly Routine

1. Charge & Check Basket
Make sure the filter basket is seated and clean. Keeping it empty maximises suction.

2. Drop & Go
Submerge the A100 to release trapped air and let it settle on the floor. Press start.

3. Let It Work
While it runs, you can skim the surface, test water, or just relax.

4. Lift & Rinse
When the cycle finishes, lift it by the handle, not the body. Pop the basket, hose it out, and you’re done.

Pro tip: In peak leaf season (hello, gum trees), run shorter, more frequent cycles. It’s faster to clear a half-full basket than a jammed one.

Maintenance Tips for Longevity

• Rinse After Every Use: Salt and chlorine are tough on plastics and seals. A quick freshwater rinse pays off.

• Sun-Smart Storage: Store it out of direct sunlight. UV resistance helps, but shade extends lifespan.

• Inspect the Tracks/Brushes: Check for trapped twigs or hair and remove them before the next cycle.

• Keep Chemistry Balanced: Balanced water protects every part of your pool system—including your robot.

Frequently Asked Questions

Will the PoolBot A100 climb walls?

It focuses on floor cleaning, which is where most debris settles in small pools. For occasional wall touch-ups, use a brush or run a wall-capable cycle if your model/setting supports it.

Is it suitable for saltwater pools?

Yes—just rinse the unit with fresh water after use, as you would with any gear that’s been in salt.

How heavy is it?

It’s built to be light enough for easy lifting in and out of a small pool. Most users can manage it comfortably with one hand on the handle.

What about very fine dust?

Use the fine-mesh filter basket (if supplied) or the standard basket with the fine insert. It’s great for red dust and pollen that can make water look cloudy.

Will it get stuck on steps or benches?

The compact body and drive profile are designed to handle common step shapes. If your pool has unusual ledges, start the first cycle under supervision and note any spots that need a quick manual brush.

It focuses on floor cleaning, which is where most debris settles in small pools. For occasional wall touch-ups, use a brush or run a wall-capable cycle if your model/setting supports it.

Yes—just rinse the unit with fresh water after use, as you would with any gear that’s been in salt.

It’s built to be light enough for easy lifting in and out of a small pool. Most users can manage it comfortably with one hand on the handle.

Use the fine-mesh filter basket (if supplied) or the standard basket with the fine insert. It’s great for red dust and pollen that can make water look cloudy.

The compact body and drive profile are designed to handle common step shapes. If your pool has unusual ledges, start the first cycle under supervision and note any spots that need a quick manual brush.